Bloggers Choice Fabric Bundle Giveaway

I've been so busy the last couple of days rearranging the studio that I almost forgot to tell you about a cute Blogger Choice Bundle giveaway over at Donna's Lavender Nest.   Donna and Pam Kitty have put together this cute little bundle.

Good luck to you!  And don't forget to check out Donna's cute little online shop.  So many fabrics that make me Purrrrrr......

~ Lea Anne~

Pin It

Drafting scallops tutorial

Sometimes pen and paper is the best and easiest way to design and draft.  I'm sure there's a computer program that could do this for me in a snap.  Or maybe some mathematical equation that looks like an alien wrote it, and it may very well be able to be done in EQ7, but darned if I can figure it out.  So here's what I'll be making.  The outer pink scallop on the Dresden.  You can find templates for it here .  But any Dresden any size will work with this method.

Now run to the kitchen and grab the freezer paper.  Have you notice that on the box is a picture for applique?  

Make sure your piece of freezer paper is 6 or 7 inches larger than your Dresden.  Iron it shiny side down to your ironing surface.  I you don't have a large ironing surface that's OK.  All you need is a large piece of any fabric, iron the freezer paper onto it, don't worry no residue will be left behind.  You can also totally skip this step if you can find another way to make the freezer paper lay flat.

See nice and flat, I leave it stuck in place until I'm finished drawing.  

Center your pressed Dresden on the sheet of freezer paper.  Secure with pins.  My ironing surface is padded so I just poked them down like a pin cushion.

At each seam make a mark that is touching the edge of the fabric.

I put another mark at the top, making a "T"  

Now just connect the dots!  The long line shown below needs to extend 2-3 inches past the mark.   And then the outer dots are connected in a circle.

All connected

Line up a ruler on 1/4 inch line and draw another line inside the first one.  This will make your seam allowance.

At this point it should look like this

Time to make that scallop.  The space between the spokes is 2 inches.  I'm using a Perfect Circle Template, but anything round will work.  Spice jars, can of mushrooms are a couple that might work.  I'm setting the center hole on the template just above the drawn line, ensuring uniform scallops.  If you are using a can or jar you'll need to make some marks on it to keep it uniform.  Or you could measure up on the spokes the height that you want your scallop, then make another ring around your drawing.

If there are gaps its OK, I promise no one will know.

Now lets smooth out that bump.  Using the same template make a "swag" between each bump.

And there you have it!  

Cut the template on the inner circle.  

Here's my original scallop.  I used 3 layers of freezer paper, this gave me a nice stiff base for turning my outside edges under with the iron.  

All that's left to do is pin like crazy and stitch!

~Lea Anne~

Pin It

Whip it up!

It's a W.I.P. Wednesday!  This is what's been whipped up so far.   Maybe a few more tulips are in order.  Of course the windows need sashings and the door needs a knob, hand stitches and a button is the plan, but who knows!

Doesn't it remind you of a Barbie Townhouse?

When I was a little girl Santa failed and brought me this instead.  Barbie can't fit in there!  Geesh!  

You know I don't understand the Barbie thing these days.  The worry over little girls wanting to look like her.  I mean really how many well adjusted girls really want to look like that?  I never did, who wants too look like a doll?  As a child Marsha Brady was my Idol.  Now that's a little more realistic.  I'm older now and just wish I had Alice here to do all the dirty work.

Well lets get back to the real world.  One more picture of some cute springy flowers.  Each block will have a different flower shape and possibly a different fabric for the house.   4 Blocks total.  Any suggestions on a name for this quilt?

~Lea Anne~

Pin It

Applique Shadow fix Tutorial

Yesterday while making a test block I ran into a little problem.  Shadowing.  Shadowing is when the background fabric shows through the applique piece.  There are some hard core quilters that would just cut away the background fabric after the applique stitched in place.  Sorry I'm not hardcore.  I'm about as soft and mushy as they come. They sell a soft fusible product just for this issue.  But I'm all about making the best of what I have.  And although the gray fabric will be used as a window, I just don't want the roses shining through the window.  

 So here's my fix.  Double pane windows!  No matter what shape you are making this technique will work.   Since I'm doing raw edge fusible applique I made 2 of the same shape leaving a little extra on the outside of the shape and windowing(cutting out the centers). Fuse them in place.

 It's hard to see in the picture below but I've cut the one on the right just a smidgen smaller on the outside.  The finished shape is the same size, but the extra outside edge is thinner.

 Remove the paper on the one that you trimmed smaller.  Leaving the paper on the other.

 Layer the 2 pieces together putting the one with the paper still attached on the bottom. Do your best to make sure the one on top is centered. 

 Press, fusing them together.

 Cut on the line to make your finished shape.  

 Here's my window

 No more peaking in my window, no shadows, no ghosts.  Its ready to be fused in place and stitched.  

Oh I used Heat and Bond Light Fusible.  Super cheap with a Joann's 50% off coupon!  Buy it by the roll.  

~Lea Anne~

Pin It